研究成果
发表论文
2020年
1. Residual crashworthiness of braided composite tube with transverse multi-impact damages: Experimental and numerical study. Composite Structure, Volume 255, 2021, 112903.
2. Damage assessment of braided composite tube subjected to repeated transverse impact. Thin-Walled Structure, Volume 156, 2020, 107004.
3. Experimental study on the low-velocity response of braided composite panel: Effect of stacking sequence. Composite Structure, Volume 252, 2020, 112691.
4. Effect of reinforcement layer number on energy absorption of aluminum-CFRP hybrid square tubes under axial loading: Experimental and numerical study. Thin-walled Structure, Volume 155, 2020, 106935.
5. Experimental study on residual crashworthiness of braided composite tubes with different stacking sequence after transverse impacted. Thin-walled Structure, Volume 155, 2020, 106900.
6. Impact damage and failure with temperature rise in biaxial non-crimp fabric reinforced polymer composite under wide range of strain rates. Aerospace Science and Technology, Volume 103, 2020, 105885.
7. Low-velocity impact performance of hybrid 3D carbon/glass woven orthogonal composite: Experiment and simulation, Composites Part B: Engineering, Volume 196, 2020, 108098.
8. Transverse impact behavior and residual axial compression characteristics of braided composite tubes: Experimental and numerical study. International Journal of Impact Engineering, Volume 142, 2020, 103578,
9. Micro-XCT Characterization and numerical analysis of bending damage mechanism in carbon fiber plain, twill and winding composite tubes. Fibers and Polymers, Volume 21, 874–897, 2020.
10. Flexible tactile sensors for dynamic triaxial force measurement based on piezoelectric elastomer. Smart Material and Structure.
11. Prediction of residual mechanical properties in flexure-after-impact of woven composite beams through electrical resistance measurement. Composite Structure, Volume 240, 2020, 112066.
2019年
1. Numerical and experimental study on effect of braiding angle on low-velocity transverse punch response of braided composite tube. International Journal of Damage Mechanics, Vol29(4), 667-686, 2020.
2. High-speed infrared imaging and mesostructural analysis of localized temperature rise in damage and failure behavior of 3-D braided carbon/epoxy composite subjected to high strain-rate compression, Polymer Testing, 2019. 106151
3. Interlayer contact mechanism of the frictional behavior of glass-fiber woven fabrics and improvements of winding characteristics. Composite Structures, 2019, 111343.
4. The numerical and experimental investigation on low-velocity impact response of composite panels: Effect of fabric architecture. Composite Structures, 2019. 111343.
5. 不同编织角复合材料增强铝方管吸能特性. 复合材料学报, 2020.37(3), 591-600.
6. Meso-Level Finite Element Modeling Method for Mechanical Response of Braided Composite Tube with Gradient Structure in Axial Direction. Applied Composite Material, Vol26(4), 1101-1119, 2019.
7. Three-point bending behavior and energy absorption capacity of composite tube reinforced by gradient braided structure in radial direction. Fibers and Polymers, Vol20(07), 1455-1466, 2019.
8. Numerical and experimental study on the joint forming mechanism in the pneumatic splicing process. Textile Research Journal, Vol89(21-22), 4512-4525, 2019.
9. 可简便调幅的剑杆织机引纬机构参数特征. 纺织学报. 2019, 40(9). 173-179.
10. Numerical investigation on the effect of tow tension on the geometry of three-dimensional orthogonally woven fabric. Textile Research Journal, Vol89(18): 3779-3791. 2019.
11. An investigation into self-sensing property of hat-shaped 3D orthogonal woven composite under bending test. Journal of Reinforced Plastics and Composites, Vol38(4):149-166, 2019.
12. 气动折入装置异向射流场中纱线的运动规律. 纺织学报, Vol39(07), 122-129, 2018.
13. Detection of bending direction and amplitude by electrical resistance measurement of axial carbon fibers in braided composite tube. Textile Research Journal, Vol89(12), 2500-2508, 2019.
14. Effect of Z-binder tension and internal micro-structure on damage behavior of 3D orthogonal woven composite. Journal of Industrial Textiles, 2019, Vol49(5):551-571.
15. Numerical prediction methodology for tow orientation on irregular mandrels with constant cross-sections. Journal of Composite Material, Vol.53(8): 1067-1078, 2019.
16. Influence of fabric architecture on crushing behavior of semi-hexagonal composite structures under axial loading. Journal of Industrial Textiles, Vol49(2), 162-180, 2019.
1. 纤维及其制品摩擦性能测试方法的研究进展. 纺织学报, 2018, 39(11):168-175.
2. 多方向照明下金属冲压字符图像融合算法. 计算机辅助设计与图形学学报, Vol30(09), 1637-1642, 2018.
3. The effect of groove structure on performance of pneumatic spliced joint. Journal of The Textile Institute, Vol109(7):903-913, 2018.
4. Effect of the frictional coefficient and pre-tension on stress distribution of fabric during the weaving process. Textile Research Journal, Vol88(8): 904-912, 2018.
1. 基于气缸的三维机织增强体织造系统设计. 纺织学报, Vol38(06), 129-134, 2017.
2. 三维编织机运动仿真分析及其轨道优化设计. 纺织学报, Vol38(04), 134-139, 2017.
3. Influence of braided fabric on the fracture modes of a composite tube under quasi-static compression. Journal of Reinforced Plastics and Composites, Vol36(10), 766-779, 2017.
4. Study on the filament motion and joint forming mechanism in pneumatic yarn splicing process. Textile Research Journal, Vol86(18), 2000-2012, 2016.
5. Air-flow characteristics and yarn whipping during start-up stage of air-jet weft insertion. Textile Research Journal, Vol86(18), 1988-1999, 2016.
6. Study on the effects of the characteristics of vortex on splice strength in pneumatic yarn splicing. Textile Research Journal, Vol86(3), 264-274, 2016.
7. 采用响应曲面法的纱线空气捻接参数优化. 纺织学报, Vol37(01), 41-46, 2016.
8. 折入孔位置对纯气动毛边折入装置流场的影响. 纺织学报, Vol.37(08), 125-131, 2016.
9. Simulation and experimental study of dynamic characteristics of a pneumatic actuator in air splicer. Journal of Donghua University English Version, Vol33(1), 61-66, 2016.
10. Study on effects of structural parameters on untwisting performance in pneumatic yarn splicing. Textile Research Journal, Vol85(17), 1776-1788, 2015.
11. 纤维与气流耦合的数值模拟. 纺织学报, Vol34(1),152-158, 2015.
12. 水下控制腔内部自然对流换热特性及其影响因素. 浙江理工大学学报, Vol31(5), 507-511, 2014.
13. 接触式纱线张力传感器动态测量模型. 纺织学报, Vol34(8), 138-142, 2013.
14. 车载燃料电池用离心压缩机的仿真和实验研究. 浙江大学学报(工学版), 2008, Vol42(5).
15. 燃料电池用高速单螺杆压缩机的仿真研究. 浙江大学学报(工学版), 2006, Vol40(2).
16. 基于用分析的轴功利用效率的研究.中国机械工程, 2006(10).
专利情况
1. 一种应用于三维环形四步法编织的送纱方法, ZL201910618519.9, 2020/09/15
2. 一种基于光照体视系统的测量纤维角度的方法及其装置, ZL201810163925.6, 2020/09/15
3. 一种应用于三维环形四步法编织机的打纬方法, ZL201910618578.6, 2020/09/05
4. 一种编织复合材料中空结构件无损一体化制孔方法, ZL201710252590.0, 2019/4/18
5. 基于可充放气/液芯轴的编织纤维增强结构件制造方法, ZL201710252839.8, 2019/4/18
6. 基于三维环形编织机中的连续引纬锁边装置及其引纬方法, ZL201710572943.5, 2018/7/14
7. 一种适用于三维编织捆绑纱控制的携纱器及反馈系统, ZL201610965137.X, 2018/4/17
8. 一种基于环形编织的任意截面芯轴的纱线轨迹求解方法, ZL201510522632.9, 2018/4/17
9. 一种基于环形编织的快速成形方法, ZL201510477185.X, 2017/11/14
10. 一种基于三维环形编织复合材料管与芯轴分离系统及方法, ZL201510803950.2, 2017/4/12
11. 一种新型径向编织机, ZL 201510725763.7, 2017/4/12
12. 一种三维环形多层编织层间偏移控制装备及其控制方法, ZL 2015 1 0515129.0, 2017/4/12
13. 一种多参数连续调节的退捻腔实验装置及其实验方法, ZL 201510006264.2, 2017/4/12
14. 一种用于三维环形编织机芯轴换接方法及其系统, ZL2015 10006570.6, 2016/9/28
15. 一种回转携纱器电能传输及张力补偿方法及其系统, ZL 2015 10006577.8, 2016/8/24
16. 一种环形三维编织机纤维导向环控制系统及其调节方法, ZL 2015 10005858.1, 2016/8/24
17. 一种用于海洋仪器的时刻记录和时钟同步方法及其装置, ZL 2014 10139614.8, 2016/8/17
18. 一种总线式实时纬线张力自动调节装置及其方法, ZL 2014 10211560.1, 2015/5/20
19. 一种进气旋度及进气流量连续可调的喷气织机主喷嘴, ZL 2014 10389030.6, 2015/8/19
20. 一种基于非均匀红外光场的纱线飞行姿态检测方法及装置, ZL 201410107808.X, 2015/3/4
21. 一种喷气织机引纬速度自动控制系统及其调节方法, ZL201310081253.1, 2014/6/5
22. 一种水下实时探测仪器的后备电源管理系统及其管理方法, ZL 201210518016.2, 2014/8/7
23. 一种单总线、带压力信号反馈的自动捻接系统, ZL 201210394248.1, 2014/4/2
24. 空气捻接测试装置, ZL 201010568804.3, 2012/5/23
